AIRTIGHT TRANSFER HATCH
WITH DIP TANK
Airtight transfer hatches with dip tanks can be used in areas with very high airtightness requirements such as biosafety laboratories and medical cleanrooms. They meet the requirements for disinfection, purification, and fumigation.
COMPONENTS
Disinfection cabin
Mechanical and electronic interlock
Airtight door
Viewing Windows
Overtime alarm and liquid level display
Ultraviolet lamp and lighting
Pipeline interface
SPECIFICATIONS
length - width - depth 1300 x 720 x 950 mm
sterilization by soaking time adjustable
overtime – door open time adjustable
This is the standard model.
Customized models can be manufactured.
FEATURES
It consists of 304 or 316L stainless steel. The inner chamber is continuously welded and resists routine laboratory disinfection and corrosion.
The surface is smooth. The built-in arcs reduce dead angles.
An ultraviolet disinfection lamp is optional. The disinfection time can be set during the disinfection process. Both doors have to be closed.
It is equipped with a standard interface for docking with the hydrogen peroxide generator for ventilation and disinfection.
The inner chamber is an airtight shell. The air pressure of 1500 Pa inside the cavity does not drop lower than 1200 Pa within 20 minutes.
The airtight doors on both sides have interlocking devices. A door only opens when the other is correctly closed. Further, it has an alarm function. When a door is open longer than the allowed duration, the buzzer will sound, and the alarm light will turn on.
Conditions of use
ambient temperature 0°C – 50°C
relative humidity not more than 85% (no condensation)
environmental pressure 86kPa – 106kPa